Allstar Spring Pre-Loader for 10in Spring ALL64230
Pre-loader allows use of a softer spring rate that is "pre-loaded" at ride height. The pre-loaded spring will have less rate increase as the suspension travels. For example, a 150 lb/in spring can be pre-loaded to 400 lbs. at ride height, but still only increases at a rate of 150 lb/in as suspension travels. The entire unit may also be exchanged with another unit with a different rate spring pre-installed to allow spring rate changes without affecting ride height. Commonly used on the rear coil-overs, pre-loader requires 3" I.D. spring, includes a thrust bearing set and fits most shocks. Note: Unit is typically installed with slotted inner half towards the shock body. Always check components for possible interference.
Alternate Description |
SPRING PRE-LOADER FOR 10IN SPRING |
||
Part Number |
ALL64230 |
||
Vendor Part Number |
ALL64230 |
||
UPC Code |
848238073713 |
||
Package Weight |
|
||
Package Length |
|
||
Package Width |
|
||
Package Height |
|
WARNING: These products may contain a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
FEATURES
- Allows use of a softer spring rate that is "pre-loaded" at ride height
- The pre-loaded spring will have less rate increase as the suspension travels
- Spring pre-load
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.