THE LAST HORN YOU'LL EVER NEED.
Driving is not just about reaching a destination—it's about the journey. And the Conductor's Special 244K Spare Tire Delete Kit is here to enhance that voyage. At the heart of this kit lies the Shocker XL train horn, crafted to capture the very essence of locomotive might.
Our Spare Tire Delete Bracket brings a fresh take on installation, prioritizing both function and form. This, combined with a Stealth Black 1NM Air Compressor and a dynamic 2-Gallon 6 Port Air Tank, positions the kit as a top-tier choice for enthusiasts.
- Signature Sound: The Shocker XL train horn, tuned to perfection, delivers a rich, authentic echo reminiscent of iconic locomotives, echoing across great distances.
- Unwavering Durability: Constructed from fiberglass-reinforced ABS and boasting stainless steel diaphragms, these horns are built to withstand the test of time.
- Streamlined Installation: Our spare tire delete bracket, crafted from 14-gauge steel and finished in a sleek two-stage powdercoat, ensures a durable and seamless setup.
- Efficient Recovery & Extended Honk: The heavy-duty stealth black 1NM air compressor ensures a quick recovery, while the 2-gallon air tank provides roughly 3-5 seconds of honk time.
- Complete Package: This kit comes with all essential mounting hardware, streamlining the setup process for you.
Important Notes:
- VEHICLE FITMENT NOTICE: This bracket is not 100% plug-and-play with all vehicles. 2020-2021 Chevy & GMC 1500 and 3500 series trucks will require some modification to the mounting point for installation. If you are unsure, please contact us for assistance.
- Fits most full-size pickups.
- The spare tire delete kit is shown assembled above for illustration purposes only. The kit will arrive as individual components and assembly will be required. Please check the install instructions in the section below.
- Adding the S6 extensions to your STDK will increase the width from 20" to 29". Please make sure you have the clearance before purchasing.
Includes
- Shocker XL train horns
- Spare tire delete bracket
- 2-gallon 6 port air tank
- 1NM Stealth black air compressor
- 110/150 PSI pressure switch w/ 40 amp relay
- Remote mountable intake filter assembly
- Spare air filter elements
- 10ft of 5/16" D.O.T. approved air line
- 17ft of 1/2" D.O.T. approved air line
- 6ft of 3/8" air line (for air compressors air intake)
- 22ft of 8-gauge red wire
- 22ft of 18-gauge blue wire
- 22ft of 18-gauge grey wire
- Black Widow 1/2" NPT stainless steel electric air valve
- HornBlasters 200 PSI stainless steel liquid-filled air gauge
- Brass NPT fittings kit including a safety blow-off & drain cock
- Complete wiring kit with fuse holder & fuses
- Mounting hardware
- Detailed instructions
SPECIFICATION | |
---|---|
Part Number | HK-S4-244K-STDK |
Honk Time | 3-5 Seconds |
Operating Pressure | 150 PSI |
Restart Pressure | 110 PSI |
Voltage | 12-Volt DC |
Horn | Shocker 4 Train Horn Kit |
Horn Material | High-impact fiberglass reinforced ABS |
Horn Measurements | № 1 19.50″ (495.30 mm) № 2 16.25″ (412.75 mm) № 3 14.75″ (374.65 mm) № 4 12.75″ (323.85 mm) |
Air Tank | HornAir 2-gallon 6 port air tank |
Average Fill Time | 50 Sec |
Max amperage | 25 Amps |
Maximum duty cycle | 100% @ 100 PSI / 50% @ 200 PSI |
Flow Rate @ 0 PSI | 1.75 CFM |
Maximum working pressure | 200 PSI |
Assembled Length | 21" |
Assembled Width | 23" |
Assembled Height | 13" |
Assembled Weight | 40 lbs |
2.0 GALLON TANK | FILL RATE |
---|---|
0 to 150 PSI | 2 min. (± 10 sec.) |
110 to 150 PSI | 35 sec. (± 05 sec.) |
Instruction Manual
FEATURES
- AUTHENTIC TRAIN HORN SOUND – Featuring the Shocker XL train horns, this kit delivers a thunderous, multi-tone blast that mirrors the iconic roar of a freight train.
- SPARE TIRE DELETE INSTALLATION – Includes a heavy-duty, 14-gauge steel Spare Tire Delete Bracket with a sleek two-stage powder coat finish for a secure, corrosion-resistant fit.
- POWERFUL AIR SYSTEM – Equipped with a Stealth Black 1NM Air Compressor and a 2-gallon, 6-port air tank for fast recovery times and 3-5 seconds of continuous honking.
- ALL-IN-ONE KIT – Comes with all the essential components needed, so you have everything needed for a complete, hassle-free installation. (Horns, Bracket, Tank, Compressor, Pressure Switch, Fittings, Air Gauge, Wiring Kit, Mounting Hardware, Air Line Cutter, Ear Plugs, and Air Line.)
- MULTI-PURPOSE FUNCTIONALITY – Not just for honking. Use it to inflate tires, air up bike tires, or power small air tools — making it a versatile addition to any full-size truck or SUV.
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.